Arora has been working on CAD-based projects since 2008.
He is competent in AutoCAD, SolidWorks, Revit and Solid Edge. He has been designing end-to-end engineering services and products for the global automotive industry. He has been working on concept designing, reverse engineering, CAD-CAM services, paper to CAD conversion, 2D to 3D CAD conversion, design and development of systems – sub systems, validation, tooling, rapid prototyping, mould development, part sourcing and manufacturing support. He works on the designs of automotive parts such as axles, rear axle shafts, trac loc clutch hubs and ring and pinion sets.
His favorite software is SolidWorks for 3D and he has been providing accurately detailed drawings and models for around a decade now.
He communicates with clients using email-based communication. He also uses Skype and WhatsApp.
Kumar has been working on CAD-based projects since 2010. He is a qualified mechanical engineer and has been working mainly for oil and gas companies.
He works mainly on AutoCAD and SolidWorks for 2D as well as 3D modeling. He provides drafting and sketching services as well as Acrobat PDF conversion services.
He also worked in the field of paper-plant engineering from 2005-2010 during his studies. While working for paper-plant builders, he provided CAD services via email and phone. He has since been using email-based communication with clients but also visits client sites whenever there is a requirement. He uses Skype and WhatsApp for client communication as well.
Patel has been working on CAD-based projects since 2013. He is a qualified architect and has been creating 2D as well as 3D designs for commercial, residential, institutional and public-sector buildings. He has significant experience in designing interiors in Mombasa during his six month internship after college. He has worked on over thirty projects (including furniture design) with both national as well as international builders.
He is competent in AutoCAD, Revit, SketchUp, ARCHICAD, CorelDraw and Photoshop.
Velauthan is a mechanical engineer. He has been working on HVAC CAD-based design services for architects and builders of commercial base buildings. He provides consultation, planning and design services for HVAC CAD.
He has worked on CAD-based projects for an Indian bank, a Canadian company that develops and sells enterprise information management software and an American conglomerate. The projects he has been working on involved concepts of interior layout and ceiling work. He is competent in handling projects based on HVAC CAD-based services including preparation of plans, sections and schematics of HVAC services. This includes chiller plant layout, ducting layout, piping layouts, detailing of plant rooms with necessary sections.
The most significant challenge for him has been the design of HVAC ducting layouts in such a way that they remain intact throughout the gradual development and the ceiling layout. While working on CAD-based projects he prepares HVAC CAD-based detailed drawings for ducting, piping and schematics.
AutoCAD has been his primary tool for producing drawings since his college days. He has also been competent in the use of Autodesk Revit since he began his career.
He travels extensively for work and discusses projects with clients face-to-face. He also communicates with them via email, TeamViewer, GoToMeeting, BlueJeans and Skype.
Connect
Ghosh has a civil engineering background and has been working on 2D and 3D CAD-based projects since 2008.
He has been handling projects for commercial buildings, stadiums, restaurants, schools and hospitals in Canada, Poland, Australia, NZ and USA. From 2008 to 2012, he worked on wooden truss detailing for a company based in Canada. Since 2013 he has been working for a leading steel detailing company headquartered in Canada.
He is skilled in AutoCAD and Revit. He is also familiar with Tekla. From January 2018, he has been working extensively on structures using AutoCAD, Revit and other detailing software.
Connect
Sebastian has been working on CAD-based projects for architects in the US since 2000. She has been handling projects related to large apartments, including lobbies, interiors and exteriors. She also reviews design operations for her clients.
She is competent in both 2D as well as 3D. She prefers to use Autodesk Revit, but she also uses AutoCAD.
Her favorite project was an interior design of a lobby since March 2017. To begin, she had to review in detail whatever was unsatisfactory with the existing design and then she produced drawings for a new design. In another one of her other favorite projects, she worked on a church which was converted to an apartment building by a developer previously. She began the process by reviewing what the property developer had already done and found out that the church’s exterior was not planned causing a lot of infiltration, so she focused and planned on the exterior of this church again.
She is familiar with Skype and Webex in order to address issues that do not require face to face interaction with a client.
Connect
Rallay is a Certified SolidWorks Professional (CSWP). He is a mechanical design engineer and has been handling complex design projects since 2010. Most of his CAD projects are 3D models, electrical circuit diagrams, P&ID’s (Piping and Instrumentation Diagrams), sheet metal drawings and weldment drawing. He has experience in the following engineering disciplines:
He works as a freelance design engineer, offering support to small and medium scale industries in India. He has also successfully handled projects with American multinational conglomerates and some of Asia’s biggest transport equipment companies.
So far he has handled projects involving:
Some of his recent works include:
He likes to work on CAD software such as SolidWorks, Autodesk Inventor, Creo, and Pro/Engineer.
He aims to continuous learn and update his software skills as he believes that most clients, particularly real estate and architectural companies, look for quick delivery and accuracy and by honing his software skills he is able to work more efficiently and quickly. He employs quality control and maintenance techniques at all times.
He noted that since clients are very particular about commitment to the delivery schedules, it is very important for CAD professionals to maintain good communication. Mr. Rallay uses Skype and Zoom meeting software to tackle problems remotely, but whenever required, he meets his clients in person.
Das is a CAD professional actively handling complex projects since 2008. He currently provides an engineering plan service.
He sketches and builds models on ArchiCad, handles raster to vector conversion, VectorWorks and MicroStation conversion, Microsoft VISIO conversion, engineered drafting of plans, partial map digitization (GIS) and a lot more. He has drawing and drafting expertise for all aspects of an engineering solution be it architectural, mechanical, electrical or civil. He has been working tirelessly round the clock for clients in Germany and the US since 2013. He is also an expert at GIS fields like digitization and parcel mapping. He has enjoyed a stable relationship with his clients all his career by responsibly maintaining product quality and on time delivery.
