Velauthan is a mechanical engineer. He has been working on HVAC CAD-based design services for architects and builders of commercial base buildings. He provides consultation, planning and design services for HVAC CAD.
He has worked on CAD-based projects for an Indian bank, a Canadian company that develops and sells enterprise information management software and an American conglomerate. The projects he has been working on involved concepts of interior layout and ceiling work. He is competent in handling projects based on HVAC CAD-based services including preparation of plans, sections and schematics of HVAC services. This includes chiller plant layout, ducting layout, piping layouts, detailing of plant rooms with necessary sections.
The most significant challenge for him has been the design of HVAC ducting layouts in such a way that they remain intact throughout the gradual development and the ceiling layout. While working on CAD-based projects he prepares HVAC CAD-based detailed drawings for ducting, piping and schematics.
AutoCAD has been his primary tool for producing drawings since his college days. He has also been competent in the use of Autodesk Revit since he began his career.
He travels extensively for work and discusses projects with clients face-to-face. He also communicates with them via email, TeamViewer, GoToMeeting, BlueJeans and Skype.
Connect
M. Spencer is currently an independent CAD entrepreneur and consultant. She is also a Business Professional specialist in the Plant Engineering department at a fortune 500 company. She holds a BA from the University of Louisville, and also a Drafting with AutoCAD Career Diploma from Penn Foster College. She has had experience from structural design, mechanical, HVAC, electrical schematics/one-lines, to evacuation plans, and 3D modeling.
Connect
E. Gard is a designer/drafter who specializes in HVAC and plumbing systems design. He has extensive knowledge of building types and applications, including mixed use buildings, military and government contracts, medical office buildings, low income housing, restaurants, apartments, hotels and high end residential homes.
Connect
Mr. Raileanu has over twenty years’ experience in CAD-based solutions designing aluminum and steel machinery, fabrication drawings, processing and part designing.
He creates designs for HVAC systems. He has designed in the following areas:
• metal fabrication
• processing and part design
• drafting and MS Office
• 2D & 3D geometry creation and manipulation
• mechanical & sheet metal structural design
• product engineering and mechanical design
He has been working with AutoCAD since college days, however he works mainly on SolidWorks to design heat and ac frames, sheet metals and enclosures. He has worked with AutoCAD since 1989, however in 2004 he discovered SolidWorks and since then he has been designing 3D models and drawings only with SolidWorks. As a proficient user of SolidWorks, he believes SolidWorks has the best user interface and intuitive, reliable FEA (Failure Effects Analysis) features.
Since 2017, he has been working with a world-class manufacturer of dehumidifiers in Georgia. He has been designing and developing innovative products and production systems to support engineering requirements. He has been using SolidWorks extensively for all product designs, weldments and frames, work assemblies and subassemblies and creation of job fabrication binders for manufacturing team members. This includes all necessary part files, bend drawings, appropriate dimensional data, general overview layout, exploded views of critical component assemblies.
Since 2016, he has been working in another company, in development of anatomically-precise 3D and 4D surface imaging systems. He works with R&D products, responsible for creating and maintaining any CAD documentation required by sales, and developing detailed engineering drawings for system design, components, cabling, and prototyping 3D printing products.
From 2015 to 2016, he also provided CAD support for a pallet rack manufacturer in Georgia that offers a full range of services from design to installation of storage solutions for many industries and materials. He designed layouts and drawings for estimating, approval, permitting and fabrication.
One of his most challenging projects was one that required him to design and build a video electronic enclosure that had to be light and also appeal to specific customers in that field (medical devices). The challenges were to make it less heavy than the previous design, to fit all electronic components required, to have a good maintenance access and to look visually appealing.
He built a mobile dehumidifier unit with a small footprint to fit other competitors design, easy maintenance access, sturdy, structurally safe, outdoor proof and easy to maneuver. He also brought some new concepts to the design to challenge the competitors’ design, such as less energy consumption (less welding) and ability to stacking during shipping or storage.
He feels that the best thing about working as a CAD draftsman is that he gets to work from home.
He uses Skype and phone to communicate with clients. He shares his screen with clients for a variety of different purposes. He also uses Webex and GoToMeeting as he finds these tools to be very effective between people at different locations. He thinks they solve most of the issues related to projects. When required, however, he also meets clients face to face. He does not believe that issues can be solved only by face-to-face meetings, but in certain situations where a personal approach is required face-to-face meetings may be more appropriate.
Connect
C. Dela is an expert in using AutoCAD in the area of HVAC, plumbing, water and fire protection (e.g. reticulation piping layout, infrastructure piping layout for an automated vacuum waste collection system). She has extensive experience in the area mechanical drawings for oil and gas clients, including preparing mechanical data sheet for refinery projects and the drawing/design of platforms for tanks and vessels.
Connect
O. Medina is an independent consultant with experience in Computer Aid Drafting software, mainly Chief Architect and AutoCad. For the past seven years he has been developing residential Architectural Drawings, HVAC and electrical drawings for residential and commercial projects. As an Architectural residential drafter he had been involved in the complete design process of projects, including schemes proposals through final construction documents. He has generated drawings for floor plans, elevations, sections, structural, electrical, plumbing, site plans and detailed sections. Also he had developed 3D walkthrough video clips for some of the projects. Oscar is currently studying electrical engineering on-line at Stony Brook University in New York. He is a graduated engineer in electronics from Saint Thomas University in Bogota Colombia.
Connect
D. Hildebrandt is a CAD Technician with extensive experience in military, residential, municipal and commercial construction. He provides the following services:
Mr. Hildebrandt graduated from Porter & Chester Institute for Mechanical Design/Drafting, and has an ACI Certification for Concrete Inspection Field Technician Level 1, and a Construction Management Certificate from the University of Washington (Construction Safety, Project Management, Construction Estimating, and Project Planning and Control).
Civil Engineers, Structural Engineers, Architects, Mechanical Engineers, Electrical Engineers, Environmental Consultants, Geologists, Telecommunications Engineers, and Builders. All phases of construction design and drafting using AutoCad, Civil 3D, and a host of graphical and processing software.
The JFK International Airport Air Train. I was one of the designers responsible for traffic control, pedestrian control, and crane movements. Time was a crucial factor, as it was near-impossible to design in advance due to construction timelines, change orders, etc. Therefore every inch of the way (a year in the making) required fast-paced engineering and realistic answers to very limiting factors.
Civil 3D is my favorite, as it includes all the tools I need to help design including survey data manipulation, earthwork calculations, road design, and profiling tools for utilities and infrastructure design.
More dedicated services. A shrinking job market requires dedication and hard work in order to hold on to clients. I’ve got to work harder to keep the work coming. There are many people looking for work who can do what I do for a fraction of the cost so I’ve had to cut corners and make deals that work in favor of my clients. Of course they work in my favor too as I’ve not lost any work and am very grateful to be busy.
I’ve always viewed the 24 hours in a day as my time when I’m not required to show up to an 8 to 5 job. I can work any time at my own pace (always very fast) and spend quality time with my family. It is an all-around flexible way to operate. Sometimes it’s difficult to make time for multiple clients, but dedication and superior workmanship are the key.
Yes. I do work remotely via email and phone. The background I posses enable ease in communication. I’ve been dealing with engineers for 25 years. I haven’t the need to work using screen-sharing. Closely-located clients, email, scanning, phone calls, and travel cover all the bases. Any and all engineering or design projects. Of course face-to-face is easier, but engineers need flexible and experienced designers to make their projects grow quickly and accurately.
Pop is an architect and has been working on CAD-based projects since 1999. She has been designing houses, offices, colleges and production houses. She has expertise in designing HVAC systems, heat and ac frames, sheet metal and enclosure framing.
She has been designing on AutoCAD since college and on ARCHICAD since 2009. She also uses SolidWorks for creating 3D models.
She connects with clients remotely through Skype and phone. She also provides consultation via face to face meetings when required.
Ms. C. Pop is an architect specializing in residential, multi housing, and industrial projects, as well as interior design. She is an expert in Archicad and Artlantis.
S. Parhi is a CAD draftsman (both 2D and 3D), and an expert in Pro-E and Solidworks. He specializes in Cad Conversion, Cad Automation, FM Services, HVAC Drawings, 3D Modeling, 3D Floor Plans, Visualization (3D Max), Part Modeling, Jig /Fixture Design and Pattern Design.
Connect
R. Pillai is an electrical engineer by profession . He has been in the domain of building services (electrical) for last 20 years. Besides the consulting service he also render services in 2D CAD and Revit platforms. He has extensive experience in the preparation of construction documents (architectural, HVAC, electrical and plumbing). He holds a bachelors degree in Electrical Engineering.
Connect
Purushothaman is a CAD/MEP Engineer and Architectural Draughtsman specializing in multi story buildings, including the preparation of 2D /3D architectural drawings for interiors, plumbing, sanitary facilities, drainage, HVAC and fire piping.
He provides the following services:
He holds a Diploma in Civil Engineering and numerous certifications in the area of structural analysis and design. He is competent in the following software tools: Autocad 2010, Archi cad, 3D Studio Max, Revit, Architectural Desk Top, GT Strudl, Stadd pro, Photoshop, Coreldraw, Pagemaker, PRIMAVERA, MS- PROJECT, Microstation.
Connect