T. Otari has over 15 years of AutoCAD experience in the areas of civil engineering, architecture, and CAD conversion (both
Connect
Arora primarily serves the global automotive industry, focusing on concept designing, reverse engineering, CAD CAM Services, Paper to CAD Conversion, 2D to 3D CAD conversion, design & development of systems/sub-systems, validation, tooling, rapid prototyping, mould development, part sourcing and manufacturing support. He uses SolidWorks 3D software and can provide accurate drawings and models in required formats.
Connect
M. Irfan performs the following services:
Mr. Irfan is experienced in a wide range of projects, including the following:
M. Rahman provides advanced GIS services, including drafting, data conversion and migration (Excel to PGDB). He primarily uses ARC Map 9.1 and and Autocad 2004.
Connect
M. Aslam is a CAD designer and an expert in AutoCAD Map 3D, Corel Draw and 3D Studio Max. He provides the following services:
Y. Sharma is a provider of Design Support Services, focusing on the following activities:
Provides Design, Analysis, Drafting & Detailing services for: a. Industrial Structures like Plant Buildings (both RCC & Steel Structures), Compressor House with EOT Cranes, Substation Buildings with Transformers, Control Rooms, Workshop Buildings, Pipe & Cable Racks, Conveyor gantries & Transfer towers, Stack like structures like chimneys, flare stacks, Static & Dynamic Equipment Foundations, Cooling Tower Basin & Pump House. b. Utilities: like Water Supply Systems with Surface & Ground Water, Roads, Drainage & Sewerage Storage Reservoirs. c. Building Structures: like Healthcare Buildings, Hospitality & resort Buildings, Educational Buildings, Commercial & Retail, Residential Buildings & Complexes. d. Steel Detailing: Also works on Tekla (X-Steel), Strucad and Autocad, and can produce Shop drawings, Fabrication drawings, Rebar details, Erection/ Field Drawings, material take offs and As-built drawings.
Provides the following services: a. Schematic Design b. Design Development c. Construction Documentation d. As-built, Record & Shop Drawings e. 2D to 3D (BIM) Conversion. Works on 2D Software like AutoCad and BIM Software like Revit and have experience of working on Healthcare, Education, Commercial, Retail, Mixed Use, Residential & Industrial projects.
Provides Design, Analysis, Drafting & Detailing services for Bulk Material Handling.
Toufeek has been working on CAD-based projects since 2006. Over the years, he has worked on a number of aircraft projects.
He is competent in AutoCAD, Google Earth Pro and ESurvey CADD. He is skilled both in 2D modelling and isometric 3D drawings using AutoCAD, and also does raster to vector conversion.
He is competent in the use of Skype to interact with clients when implementing their suggestions or requests for changes.
Connect
S. Ghosh is a senior cad designer specializing in the design and drafting of bulk material handling equipment. He has extensive experience in the field of coal handling equipment and the use of Microstation and Smart Plant P&ID to draft piping and instrumentation diagrams and isometric from GA of piping drawings. Mr. Ghosh started his carrier as a cad draftsman, and was responsible for implementing the use of CAD tools in the field of CAD conversion and GIS. He has a BE degree.
Venkatesh constructs projects involving structural and mechanical design and drafting. He is skilled in the use of Skype and Mikogo to interact and share screens with clients, and often uses them to exchange details with colleagues. He is competent in the use of AutoCAD 2D and 3D as well as Revit and specializes in 3D modelling. He is also competent in ArchiCAD and Rhinoceros 3D.
He has created simulations for heating and ventilation systems using Revit. He also handles projects involving raster to vector conversions. One of the projects that he found most challenging was with Esplanade One Mall in Bhubaneswar for which he worked on the technology of facade and curtain wall glazing. He is also skilled in flying ribbon modelling which was also applied in this project.
Over the last few years he has worked on a number of projects for steel contractors and real estate clients in Australia. He has worked on product design for a leading global contractor in engineering and interior systems. He also specializes in conceptual modelling using grasshopper code and Tekla for steel modelling.
