Mr. Sharma has been a CAD draftsman and designer since 2002 in water supply, sewerage systems, roads and drainage systems.
He mostly designs 2D drawings and models using AutoCAD, WaterGEMS, SewerGEMS, MS Excel and MS Word.
He has been designing for many government projects, such as follows:
• From 2014-15, he worked with Jammu and Kashmir Economic Reconstruction Agency on framing specifications and reviewing design aspects for networks.
• From 2013 to 14, he was working with Bihar Urban Infrastructure Development Corporation Limited to improve water supply facility in Bhagalpur, Gaya and Darbhanga towns of Bihar. He undertook soil investigations and verified survey drawings, designed and reviewed water supply distribution network, optimized designs of water supply networks, prepared detailed scheme reports, created distribution network drawings and designed for rehabilitation of water pipelines.
• From 2013 to 15, he worked with Public Health Engineering Department, government of Rajasthan. Preparation of detailed civil, mechanical and engineering designs; detailed design engineering of water supply distribution network and preparation of the detailed drawings and cost estimates.
• From 2007-08, he worked on a reverse engineering project with a client outside India where initial designs were marked and he created detailed layouts.
• From 2005-06, he worked on a project with R&D design center of Maryland County. It involved residential, industrial and commercial site planning and infrastructure development relating water supply.
He makes use of phone and email to communicate with clients. He prefers face to face meetings to discuss projects, however he also uses Skype and WhatsApp to connect with distant clients and to transfer drawings that have been modified.
Connect
Sharma provides engineering services to structural steel and pre-engineered steel builders. He has worked with churches in the US and a company involved in digital electronic equipment, construction material and car accessories equipment.
When serving clients in the US, he works according to the building code standards of MBMA and AWIS. Since building code standards change from company to company based on their production capability, so he collects their standards during the course of a project. In this way, he easily adopts their standards during the preparation of GAD’s (general arrangement drawings), which he then uses for creating fabrication drawing. A fabrication drawing is further used to create shop drawings. Based on such shop drawings, he creates a component list in the form of a shipper (i.e. equipment lists for the logistics service provider).
On the basis of a company’s standards and approved drawings, he prepares shop, fabrication or component assembly drawings and bills of materials (BOM’s) or shippers. He mainly uses AutoCAD, TEKLA and MS Office to prepare these documents.
With respect to pre-engineered buildings (PEB’s), he handles all types of complexity, such as high bay and low bay combinations, fascia, bypass and flush conditions, mezzanines, cranes and crane walkway platforms, staircases, sunken slab mezzanine cut outs, canopies, screw downs and floating roof systems.
B. Sharma is a design consultant, a role he has performed since 2009. He previously worked as designing consultant for civil work, performing the role of site engineer whenever required. He now focuses primarily on petroleum storage surveys and civil structural designs.
Connect
P. Munankarmi is highly experienced expert in Auto Cad, both 2D and 3D. He also provides CAD training services, and has worked in both Nepal and Qatar. He specializes in residential buildings.
Connect
P. Munankarmi is highly experienced expert in Auto Cad, both 2D and 3D. He also provides CAD training services, and has worked in both Nepal and Qatar. He specializes in residential buildings.
V. Sharma is an expert in AutoCAD and Ansys, and specializes in automotive drawings.
Connect
Y. Sharma is a provider of Design Support Services, focusing on the following activities:
Provides Design, Analysis, Drafting & Detailing services for: a. Industrial Structures like Plant Buildings (both RCC & Steel Structures), Compressor House with EOT Cranes, Substation Buildings with Transformers, Control Rooms, Workshop Buildings, Pipe & Cable Racks, Conveyor gantries & Transfer towers, Stack like structures like chimneys, flare stacks, Static & Dynamic Equipment Foundations, Cooling Tower Basin & Pump House. b. Utilities: like Water Supply Systems with Surface & Ground Water, Roads, Drainage & Sewerage Storage Reservoirs. c. Building Structures: like Healthcare Buildings, Hospitality & resort Buildings, Educational Buildings, Commercial & Retail, Residential Buildings & Complexes. d. Steel Detailing: Also works on Tekla (X-Steel), Strucad and Autocad, and can produce Shop drawings, Fabrication drawings, Rebar details, Erection/ Field Drawings, material take offs and As-built drawings.
Provides the following services: a. Schematic Design b. Design Development c. Construction Documentation d. As-built, Record & Shop Drawings e. 2D to 3D (BIM) Conversion. Works on 2D Software like AutoCad and BIM Software like Revit and have experience of working on Healthcare, Education, Commercial, Retail, Mixed Use, Residential & Industrial projects.
Provides Design, Analysis, Drafting & Detailing services for Bulk Material Handling.
G. Sharma is a Design Architect/Concept Visualiser. He provides Design Services on project basis to private Architectural Firms. Mr. Sharma has extensive experience in design development and design visualization. Mr Sharma has a Bachelors degree in Architecture and also has a specialized Diploma in Visual Art/Architectural Visualization. He is affiliated with Council of Architecture in India.
Connect
S. Sharma is a Qualified B.Arch. from Mumbai. He has executed a wide range of international CAD drafting projects for AEC clients. He has also managed a team of drafters and modelers for BIM Modeling and CAD-related services. He specializes in coordinating MEP services.
Connect