101 Search Results for CAD conversion

Kumar has been working on CAD-based projects since 2010. He is a qualified mechanical engineer and has been working mainly for oil and gas companies.
He works mainly on AutoCAD and SolidWorks for 2D as well as 3D modeling. He provides drafting and sketching services as well as Acrobat PDF conversion services.
He also worked in the field of paper-plant engineering from 2005-2010 during his studies. While working for paper-plant builders, he provided CAD services via email and phone. He has since been using email-based communication with clients but also visits client sites whenever there is a requirement. He uses Skype and WhatsApp for client communication as well.

Rallay is a Certified SolidWorks Professional (CSWP). He is a mechanical design engineer and has been handling complex design projects since 2010. Most of his CAD projects are 3D models, electrical circuit diagrams, P&ID’s (Piping and Instrumentation Diagrams), sheet metal drawings and weldment drawing. He has experience in the following engineering disciplines:

• Mechanical design engineering,
• Automotive engineering,
• Petroleum engineering,
• Hydraulics engineering and
• Industrial automation.

He works as a freelance design engineer, offering support to small and medium scale industries in India. He has also successfully handled projects with American multinational conglomerates and some of Asia’s biggest transport equipment companies.

So far he has handled projects involving:

• conceptual designs, parametric designs, 2D to 3D of parts & assemblies.
• 3D models of casting, forging & machined parts, sheet metal, assemblies, weldments and surfacing.
• manufacturing and detail drawings, general arrangement drawings (GA’s).
• technical documentation, operation and maintenance manuals, exploded views, spare part manuals, testing procedures and spare part stickers.

Some of his recent works include:

• 2D to 3D conversion of Lever Safety Valve created on Inventor.
• 2D to 3D conversion of Single Plate Clutch created on Pro/Engineer & Creo.
• 3D Model and detail drawing of Wear Ring used in Fifth Wheel Coupling – SolidWorks.
• Assembly drawing with BOM of Fifth Wheel Coupling.
• Fifth Wheel Coupling assembly – SolidWorks.
• Trailer Axle Exploded View with BOM for an Indian client.
• Leaf Suspension Exploded View with BOM for an Indian client.
• Prepared around 50 electrical schematics for testing of 4G SIM card.

He likes to work on CAD software such as SolidWorks, Autodesk Inventor, Creo, and Pro/Engineer.
He aims to continuous learn and update his software skills as he believes that most clients, particularly real estate and architectural companies, look for quick delivery and accuracy and by honing his software skills he is able to work more efficiently and quickly. He employs quality control and maintenance techniques at all times.

He noted that since clients are very particular about commitment to the delivery schedules, it is very important for CAD professionals to maintain good communication. Mr. Rallay uses Skype and Zoom meeting software to tackle problems remotely, but whenever required, he meets his clients in person.

View Samples

Mr. Rajput has been handling CAD-based projects as a freelancer since 2015. He has an architectural design background.

He is competent in AutoCAD drafting, raster to vector conversion and Google SketchUp. He also specializes in 3D modelling and uses AutoCAD 3D and Google Sketchup 3D for 3D drawings.

He has been designing for UK-based clients since 2015. Using Webex, SmartDrop and Skype, he has remotely managed and drafted a number of projects for clients in the UK. The most interesting CAD project that he has worked on involved drafting and designing floor plans for a construction company in the UK.

Das is a CAD professional actively handling complex projects since 2008. He currently provides an engineering plan service.

He sketches and builds models on ArchiCad, handles raster to vector conversion, VectorWorks and MicroStation conversion, Microsoft VISIO conversion, engineered drafting of plans, partial map digitization (GIS) and a lot more. He has drawing and drafting expertise for all aspects of an engineering solution be it architectural, mechanical, electrical or civil. He has been working tirelessly round the clock for clients in Germany and the US since 2013. He is also an expert at GIS fields like digitization and parcel mapping. He has enjoyed a stable relationship with his clients all his career by responsibly maintaining product quality and on time delivery.

View Samples

Attigeri has worked extensively on projects involving 2D to 3D conversion in CAD, product development (Mechanical) and structural design (Civil). He is skilled in Torrid, AutoCAD and other CAD software SolidWorks, Tekla2017. He has worked for clients from Saudi Arabia, Ireland, Egypt and Canada. He is currently living in India and has an experience of 15 years in this field. He welcomes the change in the use of technology. With the use of Skype and Webex, he often shares desktop and provides consulting remotely. He adds that these tools also prove to be of great help when he is working with clients abroad.

His core specialties include mechanical concept design, product design & development, tool design, press tool design & mould design, 2D to 3D & 3D to 2D conversion, 3D modeling & 3D rendering, reverse engineering, machine design / SPM, pharmaceutical packing machine format parts design and development, structural steel design and detailing of fabrication drawings.

Prajapati has been working on CAD-based projects since 2003. He is skilled in both 2D drafting as well as 3D modelling.

He has mainly been handling commercial building projects for clients. He has worked on projects for corporate clients, registered NGOs and international organizations that focus on school construction projects. From 2015 he has been working for an international NGO involved in projects related to agriculture, forestry, health, education, disability, renewable energy, construction, environment and poverty reduction in Nepal.

His favorite software for 2D drawings is AutoCAD and for 3D visualization he prefers SketchUp, but also creates models in Revit. For 3D visualization, he makes use of SketchUp and Autodesk 3DS Max. For creating animations, he uses Lumion Architecture along with Adobe After Effects and Adobe Premiere Pro. He has drafted and put together raster to vector conversions in the past but has been focusing mainly on 2D modelling since 2015.

His favorite project was a cable car project in Nepal. The project aids tourists visiting a temple near Mount Everest. The challenge here was to design standard machinery drawings and to include every detail of the cable car supplier. This involved a great amount of coordination.

He uses Skype, Viber and WhatsApp to communicate with clients when working on a project at a location far from his client.

I. Spasic designs models for testing in wind tunnels, including the interior redesign of models for placing measurement equipment, redesign of the exterior of the model for optimization of geometry for the wind tunnel test, making the necessary technical documentation, production and assembly documentation. His work includes coordination with manufacturing engineers in the preparation of technological process and machining (CAM), and coordination of all stages and final model control.

His work includes the following:

• Working as CAD engineer, proficient in computer-aided design in Siemens NX (Formerly Unigraphics).
• Advanced knowledge of 3D design, assembly design, surfacing, drafting and documentation, and control of models geometry
• Developing models that meet needs of wind tunnel testing, most often on a compressed time schedule.
• Preparation or/and editing of solid models using NX versions 7.5 and 8.
• Conversion of models to 2D drawings, and in many cases converting 2D drawings to 3D models.
• Reverse engineering (the reverse-engineering process involves measuring an object and then reconstructing it as a 3D model).
• Creating assembly documentation, reports and assembly guides.
• Design of mold tools for plastic or composite materials.
• Design of electrodes for electric discharge machines.
• Design of large number of prototype parts, tools or assemblies used in MTI (The Military Technical Institute – Republic of Serbia).
• Design of 3rd-party (non army) customer projects.
• communication with wind tunnel engineers, manufacturing Engineers and production personnel.

M. Fitzgerald is a consultant and trainer in the area of CAD, Drafting and Illustration. He specializes in the following activities:

1. Architectural & Mechanical Drafting, including plans/elevations/sections/details, sketches to working drawings, as built surveys of existing structures, or mechanical parts using AutoCAD Scan to PDF, JPG, or TIFF for mark-up, or true reverse engineering, (i.e., re-drawing existing plans to AutoCad-dwg files).
2. Architectural and Mechanical Renderings: traditional 2D, or 3D renderings of plans/elevations, or pen and ink illustrations.
3. Site Visits (New York, or New Jersey) for onsite measurements of existing conditions and digital photography of sites.
4. Providing AutoCad layouts, for “Retrofit jobs, new designs, and “As-Built drawings”.
5. Providing “Graphic Conversions” for use in dynamic linking software, required on customer sites and for sales presentations.
6. Assisting Design Engineers & Field Technicians by providing them with AutoCAD, drawings and “As-Builts”.
7. Graphic conversions of Acad drawings to Windows Metafile drawings and to Micrographic Designer drawings and conversion from Bentley MicroStation to Acad drawings.
8. Assisting Account Managers (Sale force) by providing them with full size printouts of project, & pre-bid drawings.
9. Providing training in architectural terms, drafting techniques, AutoCAD skills for architectural work, technical writing skills, & minor mathematics for use in the architectural /engineering fields.
10. Providing manual/hand drawings and CAD drafting (Personal Designer Cad software) working with concrete construction layout drawings.
11. Manual drafting (pencil layouts), working with mechanical drawings from engineering and field personnel.

N. Felix is a draftsman and CAD & CAM technician. He performs conversions from 2d to 3d, designs parts from sketches, and models ideas and parts.

Interview with Mr. N. Felix

1. What kinds of clients do you serve?

   I serve many types of clients, including medical, consumer products, machinery and furniture.

2. What was the most interesting CAD project that you ever worked on? What made it interesting?
   What challenges did you face?

   I love working with medical devices and products because I know eventually it might save someones life.

3. Of the software tools that you use, which is your favorite and why?

   Autodesk Inventor, because it is easy to use and produces great quality work.

4. What trends are you observing in the market for CAD services?
   How have these trends affected you, and how are you responding to them?

   More and more, customers are looking for renderings of their products. The more realistic, the better. I took it upon myself to learn 3d rendering.

5. What do you like about working as an interim CAD draftsman or external CAD consultant working on a time-bound project?

   I get lost in all my projects and time just flies when I am working on a CAD project.

6. Have you ever provided CAD consulting services remotely, either via phone, the Web or email?
   Do you use any screen sharing tools (like Webex, Skype, or GoToMeeting), and are they effective?
   What kinds of questions and problems could you tackle remotely?
   Are there any issues that you feel are better handled face-to-face?

   I have had video conference calls with customers for clarifications.

H. Raj provides customization of CAD software and CAD migration services. He also specializes in the automation of drawing creation, conversion of drawing information from one CAD package format to another, and the assembling of parts based on existing drawing files.

M. Rahman provides advanced GIS services, including drafting, data conversion and migration (Excel to PGDB). He primarily uses ARC Map 9.1 and and Autocad 2004.