Arora has been working on CAD-based projects since 2008.
He is competent in AutoCAD, SolidWorks, Revit and Solid Edge. He has been designing end-to-end engineering services and products for the global automotive industry. He has been working on concept designing, reverse engineering, CAD-CAM services, paper to CAD conversion, 2D to 3D CAD conversion, design and development of systems – sub systems, validation, tooling, rapid prototyping, mould development, part sourcing and manufacturing support. He works on the designs of automotive parts such as axles, rear axle shafts, trac loc clutch hubs and ring and pinion sets.
His favorite software is SolidWorks for 3D and he has been providing accurately detailed drawings and models for around a decade now.
He communicates with clients using email-based communication. He also uses Skype and WhatsApp.
Kumar has been working on CAD-based projects since 2010. He is a qualified mechanical engineer and has been working mainly for oil and gas companies.
He works mainly on AutoCAD and SolidWorks for 2D as well as 3D modeling. He provides drafting and sketching services as well as Acrobat PDF conversion services.
He also worked in the field of paper-plant engineering from 2005-2010 during his studies. While working for paper-plant builders, he provided CAD services via email and phone. He has since been using email-based communication with clients but also visits client sites whenever there is a requirement. He uses Skype and WhatsApp for client communication as well.
Tawade is a certified electrical engineer and a company owner. He has been working on CAD-based projects since 2015.
He has been working mostly on electric control panel manufacturing and PLC (i.e. programmable logical control) service designing. He works mostly on panel-design software such as AutoCAD and EPLAN Electric P8. He has been creating a range of HMI (Human Machine Interface) devices. He has also been designing a range of industrial computer control systems (PLCs) that help to monitor states of input devices and make decisions to control output devices.
He prefers phone and email-based communication with clients and meets them face to face to arrive at important decisions.
Patel has been working on CAD-based projects since 2013. He is a qualified architect and has been creating 2D as well as 3D designs for commercial, residential, institutional and public-sector buildings. He has significant experience in designing interiors in Mombasa during his six month internship after college. He has worked on over thirty projects (including furniture design) with both national as well as international builders.
He is competent in AutoCAD, Revit, SketchUp, ARCHICAD, CorelDraw and Photoshop.
A. Ali is an Interior Designer and 3d modeler. He is an expert in AutoCAD, and provides drafting, designing and 3d modeling services. He has a certificate in interior designing from CRISP and 3ds Max with V-ray.
1. What kinds of clients do you serve?
All kinds of companies that require machining of car parts. I design car or industrial part machining lines, including design of special machines, fixtures, transfer lines, FMS lines and multi spindles.
2. What was the most interesting CAD project that you ever worked on? What made it interesting? What challenges did you face?
Design the metalic car parts production & machining lines like the Peugeot 206 & 504 pivot and rear arme, the Renault drive shaft, a KIA Motors cylinder block and head, and EF7 motor cylinder block & head and brake disk lines.
3. Of the software tools that you use, which is your favorite and why?
Mechanical Desktop , because it has very powerful 2D. And Catia software , because it has very powerful 3D, analyse, and CAM. Also, Master CAM and Powermill.
4. What trends are you observing in the market for CAD services? How have these trends affected you, and how are you responding to them?
The latest technologies enable us to finish projects quick and easy.
5. What do you like about working as an interim CAD draftsman or external CAD consultant working on a time-bound project?
I can work both on site and remotely.
6. Have you ever provided CAD consulting services remotely, either via phone, the Web or email? Do you use any screen sharing tools (like Webex, Skype, or GoToMeeting), and are they effective? What kinds of questions and problems could you tackle remotely? Are there any issues that you feel are better handled face-to-face?
Face to face is best, and after that is email. Skype is last because my net connection speed is not good.
Connect
Dabholkar has been working on CAD-based projects since 1997. He is a qualified mechanical draughtsman.
He has been working as a CAD expert for many companies in India. He is competent in AutoCAD-2D, SolidWorks, Revit 2009, ArchiCAD 11 and Vico Constructer. He is also proficient in Microsoft – Excel, Word, Power Point, CorelDraw and Photoshop.
He began working for CAD-based projects as a Senior CAD-draughtsman for an engineering services company where for three years he communicated with clients regarding their queries, scheduled and checked drawings prepared by a drafting team. He was working on electrical substation designs, electrical layout drawings, general arrangements, earth mat layouts, clearance diagrams, erection key drawings, protection drawings, structural drawings and architectural drawings.
He then started working as an AutoCAD designer for another company providing engineering-fabrication and construction services to construct heavy industrial Pre-Engineered Buildings (PEB). Here, he worked on PEB structural drawings, general arrangements, fabrication drawings and erection drawings for four years.
He then worked with a company trading, distributing and supplying bundle note counting machines. Here he worked for six years on note counting machines, mainly drawings and detailing of clamper assemblies, cam assemblies, rotor assemblies, fabrication drawings and machine assemblies.
Then he worked as a mechanical draughtsman for a company that manufacturers automobile parts, components and hard chrome plated shafts in India. Here he worked for two years on component drawings, detail drawings, assembly drawings of portable irons, portable fans, table fans, ceiling fans, rotors and stators.
He then worked as a mechanical draughtsman for an Indian multinational company engaged in design, manufacturing and marketing of products related to power generation, transmission and distribution. In the fan division of the design department he worked for three years on designs of fans, assembly drawings, detail drawings, component drawings, fan end shields, blades, rotors, stators and blade alignments. In the Machine Division of the design department he worked on designs of submersible pumps, component drawings of fans, end shields, main bodies, rotors, stators and shafts.
Tushar has been working on CAD-based projects since 2007. He is competent at piping and water treatment designs, fabrication drawings and hand-made design sketches. For example, he has worked on projects for a US- based company that provides a full range of physio-chemical and biological processes for recycling of water.
His favorite software is AutoCAD. He has been working on AutoCAD conversions and 2D to 3D conversions since 2007. He has been creating foundation-level drawings since 2010 as well.
Pithani has been working on CAD-based projects since 2003. He has been serving clients in diverse fields, such as info-tech, telecom, piping and marine construction.
He has been using MS Project for scheduling and AutoCAD for fabrication drawings, nesting plans, and designing 2D and 3D models.
He has been working for an Indian offshore shipping firm involved in shipbuilding since 2010.
Velauthan is a mechanical engineer. He has been working on HVAC CAD-based design services for architects and builders of commercial base buildings. He provides consultation, planning and design services for HVAC CAD.
He has worked on CAD-based projects for an Indian bank, a Canadian company that develops and sells enterprise information management software and an American conglomerate. The projects he has been working on involved concepts of interior layout and ceiling work. He is competent in handling projects based on HVAC CAD-based services including preparation of plans, sections and schematics of HVAC services. This includes chiller plant layout, ducting layout, piping layouts, detailing of plant rooms with necessary sections.
The most significant challenge for him has been the design of HVAC ducting layouts in such a way that they remain intact throughout the gradual development and the ceiling layout. While working on CAD-based projects he prepares HVAC CAD-based detailed drawings for ducting, piping and schematics.
AutoCAD has been his primary tool for producing drawings since his college days. He has also been competent in the use of Autodesk Revit since he began his career.
He travels extensively for work and discusses projects with clients face-to-face. He also communicates with them via email, TeamViewer, GoToMeeting, BlueJeans and Skype.
Connect
Ghosh has a civil engineering background and has been working on 2D and 3D CAD-based projects since 2008.
He has been handling projects for commercial buildings, stadiums, restaurants, schools and hospitals in Canada, Poland, Australia, NZ and USA. From 2008 to 2012, he worked on wooden truss detailing for a company based in Canada. Since 2013 he has been working for a leading steel detailing company headquartered in Canada.
He is skilled in AutoCAD and Revit. He is also familiar with Tekla. From January 2018, he has been working extensively on structures using AutoCAD, Revit and other detailing software.
Connect
Kavthankar has a background in mechanical engineering and has been handling CAD-based projects since 2005.
He has worked for an American multinational engineering firm that provides design, consulting, construction, and management services. He has also worked on a large number of projects for clients in Britain and France.
He uses Skype and Webex to communicate with clients based outside of India.
Connect
Jansari has been working as a mechanical designer on CAD-based projects since 2005. He has mostly worked for clients in India and Canada.
He has been handling projects for a wide range of clients including companies in the following industries:
He is proficient in 2D as well as 3D, and prefers to use Autodesk Inventor, AutoCAD, Fusion 360, SolidWorks, Autodesk HSMWorks, Navisworks and Solid Edge. He likes to be involved from the initial stages of prototyping to testing, modifying, re-testing, trouble-shooting and design calculation.
His work mainly involves the preparation of fabrication drawings, mining designs, forgings, plastic parts, sheet metal, investment casting and automotive casting.
He makes use of Skype and Webex to incorporate client suggestions whenever meetings are not possible.
Connect