Dabholkar has been working on CAD-based projects since 1997. He is a qualified mechanical draughtsman.
He has been working as a CAD expert for many companies in India. He is competent in AutoCAD-2D, SolidWorks, Revit 2009, ArchiCAD 11 and Vico Constructer. He is also proficient in Microsoft – Excel, Word, Power Point, CorelDraw and Photoshop.
He began working for CAD-based projects as a Senior CAD-draughtsman for an engineering services company where for three years he communicated with clients regarding their queries, scheduled and checked drawings prepared by a drafting team. He was working on electrical substation designs, electrical layout drawings, general arrangements, earth mat layouts, clearance diagrams, erection key drawings, protection drawings, structural drawings and architectural drawings.
He then started working as an AutoCAD designer for another company providing engineering-fabrication and construction services to construct heavy industrial Pre-Engineered Buildings (PEB). Here, he worked on PEB structural drawings, general arrangements, fabrication drawings and erection drawings for four years.
He then worked with a company trading, distributing and supplying bundle note counting machines. Here he worked for six years on note counting machines, mainly drawings and detailing of clamper assemblies, cam assemblies, rotor assemblies, fabrication drawings and machine assemblies.
Then he worked as a mechanical draughtsman for a company that manufacturers automobile parts, components and hard chrome plated shafts in India. Here he worked for two years on component drawings, detail drawings, assembly drawings of portable irons, portable fans, table fans, ceiling fans, rotors and stators.
He then worked as a mechanical draughtsman for an Indian multinational company engaged in design, manufacturing and marketing of products related to power generation, transmission and distribution. In the fan division of the design department he worked for three years on designs of fans, assembly drawings, detail drawings, component drawings, fan end shields, blades, rotors, stators and blade alignments. In the Machine Division of the design department he worked on designs of submersible pumps, component drawings of fans, end shields, main bodies, rotors, stators and shafts.
N. Afonso is an expert in use of Autocad (2D and 3D CAD) and DTP software. He has specialized in the area of metal mechanics, where he has spent 10 years in mechanical project and work coordination. He has also focused on conveyor and materials handling systems specification, design and installation and has developed projects linked to mining, cement plants, chemical production and steel production. He has been involved in producing detailed drawings of turnkey projects for quarries, mines, cement plants, and is familiar with crushers, screeners, hoppers, feeders, discharge gutters, belt conveyors and bucket elevators. Mr. Afonso typically starts with a layout study to define dimensions of height of the machines and then prepares a budget form all material required for an installation. He then prepares the detailed layout and all detail drawings that are required. Mr. Afonso has a Mechanical Engineering degree and a Technological Specialization Diploma in Mechanical Technology.
Connect
Mr. Palacio is an industrial designer and a product engineer. He makes a range of products for kids such as robots, kid play pools, bubble machines, inflatable toys, and air pumps. He has a background in engineering with excellent skills in 3D modeling.
He is competent in the following areas:
• CAD, CAM, CNC
• Creative designing and engineering
• Illustration, Industrial Design, Prototyping, Rendering, Robots and toys
He started his career as an industrial design intern with a manufacturer in China that creates quality innovative plastic products. He was involved with an international team for development of inflatable products. He worked with R&D engineers to generate new product development using Pro/Engineer CAD, CAM, CAE software to design new and innovative shapes with PVC sheets and rigid plastics.
Since January 2016 to present, he has been working in Shanghai. He designed a kid’s robot called Otto DIY. It is a 3D printable bipedal robot that comes to use of educating kids at STEAM (Science, Technology, Engineering, the Arts and Mathematics).
From March 2014 to December 2018, he worked on the development of inflatable summer leisure products for a manufacturer in China. He has been working on the designs of inflatable hot tubs, furniture, water sport products and toys for children with reputed brands such as Disney, Mattel and other licenses. He designed and developed more than a hundred projects in a year and successfully launched them in retail market.
From April 2014 to November 2015, he worked on Plobot in China. During this period he designed a tangible programming robot for children above four years age to enhance logical thinking and basic coding skills.
From March 2013 to February 2014, he worked in Copacabana, Colombia. During this period he was involved in research, development and marketing of cryo-therapy and thermotherapy products and sublimation graphic process applied to polyester fabrics. He was working on sampling of ideas to be manufactured.
From June 2012 to February 2013, he worked in Medellin, Colombia. During this period he designed and created animatronics characters for theme parks and shopping malls.
Mr. Palacio has received many awards and recognitions during the course of his creative journey. Some of them are as follows:
• STIDA in 2016: Second place in Industrial Design contest by Ministry of development in China
• Stratasys, Inc. in 2014: 3D printer
• Parametric Technology Corporation in 2011: PTC Academic “Speaker Box challenge”
Tawade is a certified electrical engineer and a company owner. He has been working on CAD-based projects since 2015.
He has been working mostly on electric control panel manufacturing and PLC (i.e. programmable logical control) service designing. He works mostly on panel-design software such as AutoCAD and EPLAN Electric P8. He has been creating a range of HMI (Human Machine Interface) devices. He has also been designing a range of industrial computer control systems (PLCs) that help to monitor states of input devices and make decisions to control output devices.
He prefers phone and email-based communication with clients and meets them face to face to arrive at important decisions.
A. Ali is an Interior Designer and 3d modeler. He is an expert in AutoCAD, and provides drafting, designing and 3d modeling services. He has a certificate in interior designing from CRISP and 3ds Max with V-ray.
1. What kinds of clients do you serve?
All kinds of companies that require machining of car parts. I design car or industrial part machining lines, including design of special machines, fixtures, transfer lines, FMS lines and multi spindles.
2. What was the most interesting CAD project that you ever worked on? What made it interesting? What challenges did you face?
Design the metalic car parts production & machining lines like the Peugeot 206 & 504 pivot and rear arme, the Renault drive shaft, a KIA Motors cylinder block and head, and EF7 motor cylinder block & head and brake disk lines.
3. Of the software tools that you use, which is your favorite and why?
Mechanical Desktop , because it has very powerful 2D. And Catia software , because it has very powerful 3D, analyse, and CAM. Also, Master CAM and Powermill.
4. What trends are you observing in the market for CAD services? How have these trends affected you, and how are you responding to them?
The latest technologies enable us to finish projects quick and easy.
5. What do you like about working as an interim CAD draftsman or external CAD consultant working on a time-bound project?
I can work both on site and remotely.
6. Have you ever provided CAD consulting services remotely, either via phone, the Web or email? Do you use any screen sharing tools (like Webex, Skype, or GoToMeeting), and are they effective? What kinds of questions and problems could you tackle remotely? Are there any issues that you feel are better handled face-to-face?
Face to face is best, and after that is email. Skype is last because my net connection speed is not good.
Connect
Rallay is a Certified SolidWorks Professional (CSWP). He is a mechanical design engineer and has been handling complex design projects since 2010. Most of his CAD projects are 3D models, electrical circuit diagrams, P&ID’s (Piping and Instrumentation Diagrams), sheet metal drawings and weldment drawing. He has experience in the following engineering disciplines:
He works as a freelance design engineer, offering support to small and medium scale industries in India. He has also successfully handled projects with American multinational conglomerates and some of Asia’s biggest transport equipment companies.
So far he has handled projects involving:
Some of his recent works include:
He likes to work on CAD software such as SolidWorks, Autodesk Inventor, Creo, and Pro/Engineer.
He aims to continuous learn and update his software skills as he believes that most clients, particularly real estate and architectural companies, look for quick delivery and accuracy and by honing his software skills he is able to work more efficiently and quickly. He employs quality control and maintenance techniques at all times.
He noted that since clients are very particular about commitment to the delivery schedules, it is very important for CAD professionals to maintain good communication. Mr. Rallay uses Skype and Zoom meeting software to tackle problems remotely, but whenever required, he meets his clients in person.
Raval has been working since 2011 in the field of new product development. For the first two years, he worked on casting, forging and automotive projects. For the next two years, he worked on agricultural machinery design, producing drawings of tractors (from the initial design phase to the final marketing) for an Indian OEM (Original Equipment Manufacturer). This OEM assembled agricultural equipment, such as tractors, harvesters, sprayers, uni-platforms, etc. For the next 3 years he has been working for a major engineering, construction, manufacturing and financial services conglomerate. He serves US and Europe-based automotive clients involved in the manufacturing of products for recreational purposes, such as ATVs, snowmobiles and motorcycles.
While working in the engineering services industry, he has handled a number of automotive projects. The most interesting CAD project that he has worked on so far was the one where he got the opportunity to design various automotive systems including driveline, gearbox, differential, engine, chassis, interior body work and exterior body.
He observes that today in the market for CAD services, design and manufacturing are coming together and every day companies launch new technologies. He believes that with the help of CAD prototyping, experts can now quickly make designs and models.
As he has been working for clients based in the U.S and Europe in the field of design and development for many years, he has learned how to select the best software for each application. He uses software to represent his conception of an idea and makes a selection according to customer requirements. His favorite tools are Creo Parametric 2.0 and 3.0, which he uses for 3D modelling, casting, forging, sheet metal and assembling models. He also likes Catia for surfacing. He likes to work on Unigraphic and AutoCAD 2D for 2D modelling.
Since he is handling projects for US and Europe-based clients, all the work-related discussion happens on Webex, Skype, and Jabber. He is now skilled in ways of connecting with the clients through Skype and remote servers. When faced with a difficult situation, he also meets the client.
Having worked as an interim CAD draftsman and an external CAD consultant on projects, he has learned about many new technologies. He looks forward to new challenges and opportunities every day.
Connect